Joining Machine

HOFFMANN MU2P PNEUMATIC DOVETAIL ROUTING MACHINE

HOFFMANN MU2P PNEUMATIC DOVETAIL ROUTING MACHINE
Portable and flexible bench top robust pneumatic machine , for routing a single dovetail slot with each machine cycle. Hoffmann key sizes W -1/2/3/4 TECHNICAL SPECIFICATION Power Supply 1ph/N/PE 230V 60/60Hz 1.0 kW Motor 1x 1000W Motor Speed 34000 1/min Control / Work – piece Clamping pneumatic/pneumatic Height Capacity 150mm Routing Depth 0-75mm Extraction port Ø 60 mm Hoffmann key sizes W -1/2/3/4 Dimensions W/D/H 680/600/500mm Weight 32 kg Pneumatic Air Supply 6 bar
Read More

HOFFMANN MU2 MANUAL DOVETAIL ROUTING MACHINE

HOFFMANN MU2 MANUAL DOVETAIL ROUTING MACHINE
Portable and flexible bench top robust machine , for routing a single dovetail slot with each machine cycle. Hoffmann key sizes W -1/2/3/4. TECHNICAL SPECIFICATION Power Supply 1ph/N/PE 230V 50/60Hz 1.0 kW Motor 1x 1000W Motor Speed 34000 1/min Control / Work – piece Clamping manual / manual Height Capacity 125mm Routing Depth 0-85mm Extraction port Ø 60 mm Hoffmann key sizes W -1/2/3/4 Dimensions W/D/H 680/600/700mm Weight 29 kg
Read More

HOFFMANN X_LINE 25 PNEUMATIC DOVETAIL ROUTING MACHINE

HOFFMANN X_LINE 25 PNEUMATIC DOVETAIL ROUTING MACHINE
Portable and flexible bench top pneumatic machine , for routing a single dovetail slot with each machine cycle. Hoffmann key sizes W -1/2/3 suitable for smaller production runs. Most of the relevant accessories can be used on this machine. TECHNICAL SPECIFICATION Power Supply 1ph/N/PE 230 V 50/60Hz 0.5kW Motor 1x 530W Motor Speed 29000 1/min Control / Work – piece Clamping pneumatic Height Capacity 95mm Routing Depth 0-75mm Extraction port Ø 60 mm Hoffmann key sizes W -1/2/3 Dimensions W/D/H 600/540/580mm Weight 20 kg Pneumatic Air Supply 6 bar
Read More

HOFFMANN X_LINE 20 MANUAL DOVETAIL ROUTING MACHINE

HOFFMANN X_LINE 20 MANUAL DOVETAIL ROUTING MACHINE
Portable and flexible bench top machine , for routing a single dovetail slot with each machine cycle. Hoffmann key sizes W-1/2/3 . Most of the relevant accessories can be used on this machine. Option: Twin version with a double spindle gearbox to produce two dovetail slots per machine cycle on special orders. TECHNICAL SPECIFICATION Power Supply 1ph/N/PE 230 V 50/60Hz 0.5kW Motor 1x 530W Motor Speed 29000 1/min Control / Work – piece Clamping manual / manual Height Capacity 110mm Routing Depth 0-80mm Extraction port Ø 60 mm Hoffmann key sizes W -1/2/3 Dimensions W/D/H 600/540/770...
Read More

U600 MEMORY PROGRAMMED MULTICHANNEL

U600 MEMORY PROGRAMMED MULTICHANNEL
FEATURES The New U600 MINIGRAF MP Multi-Chan nel is the evolution of our standard Memory Program Machine, it has the same ease of use, speed, and precision of assembly. The Multichannel version has ve different nail magazines containing v-nails of different heights, 5mm, 7mm,10mm,12mm, and 15mm. In the same working cycle, the operator can insert and/or stack dierent v-nail heights in several different positions. The Memory Program technology is ”State of the Art” allowing you to store unlimited different programs & can also be downloaded to the machine by using a PC. Once this info...
Read More

U500 MEMORY PROGRAMMED / SINGLE CHANNEL

U500 MEMORY PROGRAMMED / SINGLE CHANNEL
FEATURES This machine has been designed for production shops which need to change over frequently Its Memory Program technology is “State of the Art” allowing profile data for unlimited frames to be entered or downloaded from a PC Once this information is stored, the operator then “brings up” the next frame to be produced or scans with the optional bar code reader This machine will automatically adjust and production can restart immediately. V-nails can be driven or stacked in up to 10 positions per corner This machine is very fast and easily drives all types of wood, plastic and MDF ...
Read More

U300P SEMI-AUTO / PNEUMATIC / PRODUCTION UNDERPINNER

U300P SEMI-AUTO / PNEUMATIC / PRODUCTION UNDERPINNER
U300 has been designed for production of small and medium sized frames. The U300P is equipped with a nail driver assembled on a movable carriage controlled pneumatically by the operator. The three positions version allows the V nail insertion at 3 separate positions one after the other. COMES EQUIPPED WITH Quick replacement magnetic pressure pads suitable to control clamping and V nail driving. Horizontal clamp device to hold tightly together, the mouldings and create a perfect joint. Pneumatic loading valve, to open the V nails magazine for quick changing. Soft moulding clamp device,...
Read More

U300 SEMI-AUTO/ PNEUMATIC UNDERPINNER

U300 SEMI-AUTO/ PNEUMATIC UNDERPINNER
U300 is the most popular model with custom framers. Alfamacchine has manufactured over 40,000 units and it is the best selling model world wide. COMES EQUIPPED WITH Special horizontal clamp to hold mould ings tightly together and create a perfect picture joint Pneumatic fence clamp for automatic locking of the mouldings in the desired position for inserting of V nails. Quick replacement magnetic pressure pads for every kind of prole. Dual function foot operated pedal for separate control of clamping and V nail’s driving. Pneumatic loading valve, to open the V nail magazine for quic...
Read More

U200 [MINIGRAPH A2M]

U200 [MINIGRAPH A2M]
The Minigraph U 200 is the new manual foot operated frame assembly machine with a simplified design. The technology applied for the mechanical components ensures the same heavy duty and reliability performances as all the other machine in the Alfamacchine range. The U200 is well situated for low levels of production,hobby trade, beginners or areas where noise is a major concern. The only manual machine which can join moulding up to130 mm wide it offers a lot of advantages such as – Tilting bench Easy to use and reduced weight Front or rear operating mode Minimum servicing The machine...
Read More

EASY HAND UNDER PINNER AND MOULDING VICE

EASY HAND UNDER PINNER AND MOULDING VICE
The combination of these two economical (simple to install and operate)tools makes excellent joints of the mouldings with the aid of some V nails which are used on the high cost machines. Vice clamps moulding up to 3″ width and frames down to 3″x3″, the jaws of the vice are designed to give firm grip to the moulding The well-engineered mechanism helps insert one V nail at a time to be used for joining by operator The positioning of the V nail in the joint is done manually by the operator at any desired point The combination of these tools can be installed on a small table and if needed ...
Read More